Please be noted:
1.Prior to
riding the vehicle, please read the User Manual carefully, and check to ensure
all parts and components intact, so as to ensure riding safety. Should any
problem be found, please timely contact the manufacturer.
2.This
electric drift vehicle is of high maneuverability, helping you to ride it on
rough roads. Riding this electric drift balance vehicle, you
are expected to avoid personal safety accident caused by possible collision,
tumble or getting out of control. To this end, you must drive carefully,
building up your
senses to identify and avoid slippery or damp road
surfaces, abrupt slopes, and loose
materials or articles.
3.To ensure
you and other people are safe, you are required to wear helmet, kneecaps, elbow pads and
other protective appliances, to avoid riding on motor ways or on the roads
where people are crowded.
4.Please ensure the
area where you are driving is free of running vehicles, avoiding being knocked
down due to slow dodging or accident.
5.Do not ride
the vehicle when it sees malfunction to avoid tumbling.
Driving:
1.Step I:
Press the power switch, and the drift vehicle will start up.
2.Step II: To
be ready for driving, please step onto the foot pad, and touch off the pedal
switch when the running indicator flickers and the the
system enters into the state of automatic balance; upon the balance of the
vehicle, you tread onto the pad with another foot, before you could operate
further.
3.Step III:
The second your feet onto the drift vehicle, you shall maintain
the vehicle barycenter and your body aligned centrally, so that the drift
vehicle will stay still. Lean forward or backward a little bit, and you will
touch off the balance vehicle, so it will run forward or backward; care shall
be taken to ensure no dramatic motion.
4.Step IV:
Operate the drift vehicle to turn left or right.
5.Step V: To
get off, you need to stop the balance vehicle and ensure it stays still and
balanced; and place one foot onto the ground first, and then ensure the other
foot gets off the pad quickly.
Protective functions of the
drift vehicle:
1.During
operation, the system might
see error or mis-operation, of which the
balance vehicle will give off prompts in different ways to remind the driver.
2.When the
alarm indicator flickers, and the buzzer rings intermittently, the system will not find its
way to the balanced mode; in such a case of system error, please do not use the
vehicle no more.
3.When an
alarm comes off, please turn off and restore the power system before further
operation.
Battery maintenance and power
charge:
1.The drift
vehicle is furnished with a set of built-in lithium ion batteries; when it is
used the first time, please ensure they are charged full.
2.Please also
ensure power charge is conducted in clean and dry ambiance. Apply one end of
the power cord of the charger to the socket of mains supply, and the other to
the drift vehicle; when the "red" indicator flickers, the
device is charging, while the flickering "green" indicator shows that
power charge is done.
3.Power charge
duration: Dedicated compatible chargers tell that it takes 1-2 hours for the
lithium ion batteries to be charged from 1% to 99%.
4.Care shall
be taken to ensure the batteries are not completely discharged; if the vehicle is
placed idle for a long time, the lithium batteries shall be regularly charged
to extend the service life of the batteries, and the batteries see the longest
service life at their 70% charged power.
5.Do not place
batteries at ambiance of high temperature, but somewhere cool under shade; they
shall be charged but not too full.
www.beyoutec.com
www.trueman-ecig.com
email: service@trueman-ecig.com
没有评论:
发表评论