Notice for Use:
Thank you for choosing trueman! Please read this manual carefully before use to ensure that your usage
is correct. If you require any additional information or have any questions about the product or its
use, please consult your local agent.
Product Introduction:
Petite yet powerful, X-1 is the device made for everyone. The x-1 stands out from other different type
of e-cig products in the market in part due to the unique design and functionality. The innovative
design of the X-1 uses two types of changeable atomizer head. Having one atomizer at a 1ohm, which is
intended for
mouth inhalers who seek the sensation of taking a puff of an analog cigarette, and another at 0.5
sub-ohm for those seeking an effortless loose draw for creating huge cloud production.
How to use:
Power on and off: Press the button for 5 times in quick succession, the button light will flash 5
times to indicate x-1 is ready for use. In the same way, X-1 will be powered off after 5 presses.
Vaping: Press the button and inhale or vape. When the button is held down, the button light will
be on.
Charging: Simply charge X-1 by connecting it with a computer or a wall adapter via USB cable. When
it’s fully charged, the button light will go out.
E-juice filling (1):
Separate the atomizer from the battery and inject the liquid directly into the cambered slot.
Atomizer Head replacement(2):
Unscrew the atomizer cone, the atomizer head is located on the base, just unscrew it and replace and
clean.
(NOTE: Please do not wash the atomizer head with water. Simply scrub it with alcohol cotton or clean
dry cloth.)
Adjustment of Air Inflow(3):
Rotating the ring on the atomizer base clockwise to decrease the air inflow, and counterclockwise
to enlarge the air inflow.
Functions:
Short circuit protection:
1. When the battery charge is low, X-1 will stop functioning. Please charge the battery to reactivate.
2. When the short circuit occurs before working, the button light flashes for 5 times and then powers
off.
3. When the short circuit occurs while working, the button light flashes for 3 times before short
circuit
(reset).
Atomizer protection: X-1 has a 15 second run time protection. The light will flash 10 times if the
button is pressed for more than 15 second.
Low voltage protection: When the battery voltage is less than 3.3V, the button light flashes for
40 times and the device power-off. Press the button can not power on.
Resistance examination:
1. When the resistance at the output end is >5ohm, the light flashes slowly if you press the button.
2. When the resistance at the output end is <0.3ohm, the light flashes quickly for 5 times, suggesting
low output or potential short circuit.
Battery display function:
The light will flash slowly or stay lit when battery quantity is high, on the contrary, the light
flashes in frequency.
The battery light flashes red when charging or connecting with USB, and goes out in five seconds when
it is fully charged.
Battery Quantity
|
Light Condition
|
60%-100%
|
Stay it
|
30%-59%
|
Slowly flashes
|
10%-29%
|
Moderately flashes
|
0-9%
|
Flashes in frequency
from Judy-Truemanecig
web: www.trueman-ecig.com
email: service@trueman-ecig.com
|
没有评论:
发表评论